Print Counterfeit Money

The easiest way to print counterfeit money is off your own home computer. You will need a scanner and laser printer. You would start by setting your scanner to the highest resolution available and scanning a real dollar bill of whatever denomination you want to print. You will need to scan both the front and back of the bill. Once you have scanned the bill and saved the image to your hard drive you will need a program like Photoshop that will allow you to manipulate the image. You will open the image in the photo editing program and you can put as many copies of the image onto one sheet of paper as the size will allow. Once you have laid all the fronts out you can print it off your laser printer. You will want to use a laser printer because it will heat fix the toner to the paper so that when the 'money' is handled it doesn't smudge. After the front is printed you will need to align the back carefully and run the sheet back through the printer to print the back side of the sheet. It will take a little finesse to get the front and back lined up perfectly but once you do then you can start printing your money. All that's left once you have perfected the printing is to cut the money neatly and voila! Also keep in mind that the money has serial numbers on it and you should change the serial number on each sheet you print so that you don't have lots of bills with the same serial. This is a dead giveaway, if you try to spend it, which I'm sure you won't.