Example: If the dialyzer's clearance is 300 mL/min and a dialysis session lasts for 180 minutes (3 hours), Kt will be 300 mL/min multiplied by 180 minutes.
kidney.niddk.nih.gov/Kudiseases/pubs/hemodialysisdose/
Measurement of dialyzer clearance, dialysis time, and body size: Death risk relationships among patients. EDMUND G LOWRIE, ZHENSHENG LI, NORMA OFSTHUN and...
www.nature.com/ki/journal/v66/n5/abs/4494854a.html
Finally, if dialysis treatment were sufficiently short, approaching 0 minutes, for example, no treatment would be delivered no matter the dialyzer clearance
www.nature.com/ki/journal/v66/n5/full/4494854a.html
Measurement of dialyzer clearance, dialysis time, and body size: death risk relationships among patients. Measurement of dialyzer clearance, dialysis time, and body size: death risk relationships ...Measurement of dialyzer clearance, dialysis time, and body size: death risk relationships among patients.
www.ncbi.nlm.nih.gov/pubmed/15496182
The effect of reuse on urea clearance is essentially defined by the residual cell volume with a total cell volume of > 80% associated with a dialyzer clearance that is within 10% of its original value.
www.ncbi.nlm.nih.gov/pubmed/11014686
The rate at which solute mass is removed from the patient by the dialyzer (in mmol/min) is the dialyzer clearance rate (in L/min) multiplied by the...
www.doctorslounge.com/nephrology/articles/dialysis_adeq... www.doctorslounge.com/nephrology/articles/dialysis_adequacy/adeq3.htm
When estimating dialyzer clearance at a given blood and dialysate flow rate (Qb and Qd, respectively), one uses an equation that incorporates these...
www.hdcn.com/7/706kiley.htm
Dialyzer clearance by dilution technique (mathematical model). Kislukhina, J., Kislukhin, V.V.. ASAIO Journal, 2003 Abstracts Vol. 49, No. 2, p. 193, 2003...
www.transonic.com/abstract.php?ReprintDataID=3323&froml... www.transonic.com/abstract.php?ReprintDataID=3323&fromlist=1
ml/min) in relation to the effective urea clearance by the dialyzer (K; ml/min) can be found from the urea concentrations in dialysate with the needles in the normal (Cn) and reverse (Cr) positions. K will have to be corrected for the amount of ultrafiltration (ml/min) that occurs at the time of measurements.
cjasn.asnjournals.org/cgi/content/full/1/5/960
Access blood water flow rate (Qaw) in relation to the effective clearance (K) is found from the urea concentrations in the dialysate with needles in the normal (Cn) and reverse (Cr) positions: K/Qaw = (Cn - Cr)/Cr. Qa is calculated by adjusting Qaw for hematocrit and protein.
cjasn.asnjournals.org/cgi/content/abstract/CJN.00810306... cjasn.asnjournals.org/cgi/content/abstract/CJN.00810306v1