|
The actual measurement conditions of capacitance and dissipation factor of high dielectric ceramic capacitors are shown in Table 1 below. The temperature used for these conditions is 25 degree: Table 1 Measuring Conditions;
|
www.murata.com/cap/measure.pdf
|
|
|
|
Composites / Plastics ... Dissipation Factor-Electrical ; De ... PC Support Terms - I...
|
composite.about.com/library/glossary/d/bldef-d1727.htm
|
|
|
|
By use of a suitable capacitance bridge and special condenser, the dielectric constant and dissipation factor at a frequency of 200 kc./sec. were measured for several varieties of cotton and for several types of trash removed during processing. ... Table of Contents...
|
trj.sagepub.com/cgi/content/abstract/24/9/841
|
|
|
The possibilities of proposition of a relation between the maximum variation of the dissipation factor and capacitance with applied test voltage and the relative volume of the air-filled voids were investigated. ... view table of contents...
|
www.ingentaconnect.com/content/klu/202/2007/00000089/00...
www.ingentaconnect.com/content/klu/202/2007/00000089/00000004/00000011
|
|
Abstract;Capacitance C and dielectric dissipation factor tan .DELTA. of a water-treed XLPE sheet sample have been measured under the application of 100 V or 1 kV at 60 Hz. The values of C and tan .DELTA. at 1 kV are much larger than those at 100 V. The value of tan .DELTA.
|
sciencelinks.jp/j-east/article/200216/000020021602A0525...
sciencelinks.jp/j-east/article/200216/000020021602A0525724.php
|
|
The incorporation of the silane coupling agent also decreases leakage current and dissipation factor. Suitable silanes are those of the general formula (R1 --R3)--Si--(OR2)3.
|
www.freepatentsonline.com/6191013.html
|
|
The present invention provides ceramic compositions for preparing multi-layer capacitors, having high dielectric constants between about 4900 and 5400, dissipation factors below about 2.0%, high insulation resistance capacitance products and stable temperature coefficient characteristics, by a process of ...
|
www.patentgenius.com/patent/4939108.html
|
|
The adhesive layer of each sample had a Young's modulus and a mechanical dissipation factor (tanδ) at 20° C. as reported in Table 1. The Young's modulus and tanδ were measured by applying an adhesive onto release paper to a thickness of 300 μm by means of a roll coater.
|
freepatentsonline.com/5936934.html
|
|
This service covers the characterization of capacitance and dissipation factor for standard 4TP air-dielectric capacitors with nominal values of 1 pF, 10 pF, 100 pF and 1000 pF, in the frequency range from 1 kHz to 10 MHz. first, three-terminal capacitance measurements are taken at 1 kHz for each ... See Table 9.3 .
|
ts.nist.gov/MeasurementServices/Calibrations/Impedance....
ts.nist.gov/MeasurementServices/Calibrations/Impedance.cfm
|
|
