|
Authentic period lighting and restoration hardware -- made to order, shipped to your door. ... Backset is the measurement from the door's edge to the center of the hole bored for the doorknobs. ... All lock and latch options for our Interior Door Sets have a standard 2-3/8" backset.
|
www.rejuvenation.com/faqnumberid3c1935a32f1ad/faq/faqsh...
www.rejuvenation.com/faqnumberid3c1935a32f1ad/faq/faqshow.html
|
|
|
|
backset of door locks ... BACKSET; In the U.S. there are two common backsets for residential door locks, 2-3/8" and 2-3/4". The backset is the distance from the edge of the door to the center of the 2-1/8" bore hole.
|
www.dadelock.com/doorbackset.asp
www.dadelock.com/doorbackset.asp
|
|
|
The backset is the measurement between the edge of the door to the center of the hole drilled for the lock. ... Kwikset provides many types of latches, some of which are adjustable from 2-3/8” to 2-3/4”. To determine your backset, measure the distance from the center of the hole drilled in the face of the door,
|
www.kwikset.com/Support/Installation/default.aspx
|
|
Door Hardware ... Available in a active and dummy set. Select Backset, door thickness, and door handing. Also please select Lever Style – Select from the following list of interior knobs or levers.
|
www.yorstor.com/s.nl/sc.2/category.2394/.f
|
|
Door Tube Latch Brass 2 3/8" Backset ... Door Tube Latch Brass ... Door Tube Latch 2 3/4" Backset Pewter...
|
www.vandykes.com/product/02007904/
|
|
Make your home into your castle with this authentically styled distressed door hardware. Although these door sets already appear to be a century old, their quality solid bronze construction assures that someday they really will be! ... The door sets have privacy functions and come with a silver patina finish. The door knob...
|
www.vandykes.com/product/02007427/
|
|
A door's backset is the horizontal distance from the edge of the door to the center line of the knob keyhole or cylinder. ... The most common backset is 2-3/8" but sometimes it can be 2-3/4". Some door hardware is made to where the latches can be adjusted from one backset to the other, but with most latches there are fixed...
|
www.homeimprovementweb.com/information/choosing-door-ha...
www.homeimprovementweb.com/information/choosing-door-hardware-2.htm
|
|
Bore a 2-1/8" hole through the door. The center of this hole should be located 2-3/8" or 2-3/4" back from the edge of the door (this is the backset dimension). Bore a 1" hole in the edge of the door located on the centerline of the 2-1/8" hole.
|
www.doorhardwaredesigns.com/backset.html
www.doorhardwaredesigns.com/backset.html
|
|
Polished brass finished master keyed and protecto featured entry door lock with matching single cylinder deadbolt. Use of the home owner key will not lock out the master key. Use of the home owner key will permanently lock out the contractor key. ... Door Guard ... Adjustable backset 2-3/8" or 2-3/4" as standard...
|
www.nusetlock.com/master-keyed-with-protectalock-door-l...
www.nusetlock.com/master-keyed-with-protectalock-door-lock-deadbolt-combo-p-112.html
|
|
