I was having my rotors turned every oil change, front one time then the rear. They had to replace my rotors before I hit 25,000 mi because they had turned them too much. I have also had my pads replaced (all under warranty).
|
answers.yahoo.com/question/index?qid=20080305043225AAO3...
answers.yahoo.com/question/index?qid=20080305043225AAO3LIB
|
|
|
My original front pads and rotors went 110K, and they were able to be turned. Also, it was $6 per rotor to get turned, and took about an ... Just bought a 2002 Ranger 2WD ABS 100k and I get a pretty shudder during moderate/hard braking. The pads look to be about 60%... do you think simply having them turned will cure it?
|
www.f150online.com/forums/wheels-tires-brakes/252775-tu...
www.f150online.com/forums/wheels-tires-brakes/252775-turn-rotors-buy-new-ones.html
|
|
|
|
Brake Pads and Rotors question: Is it normal for the rear brakes of a new 2005 Taurus Wagon with low miles to make a grinding metal on metal sound even after having the rotors turned? check your wheel ... In: Brake Pads and Rotors [ Edit categories]
|
wiki.answers.com/Q/Is_it_normal_for_the_rear_brakes_of_...
wiki.answers.com/Q/Is_it_normal_for_the_rear_brakes_of_a_new_2005_Taurus_Wagon_with_low_miles_to_make_a_grinding_metal_on_metal_sound_even_after_having_the_rotors_turned
|
|
|
Replacing the non composite rotors with new OEM or Genuine OES quality discs will in most cases is about the same price as having the rotors turned. For composite rotors, we recommend only replacing the rotors if the become defective, warped or have deep grooves.
|
www.drivewire.com/part/brakes/brake-rotors/
www.drivewire.com/part/brakes/brake-rotors/
|
|
13 Apr 2008 - NEW CURTIS HELI - IT'S A 450! ; Curtis' first heli has been announced and it's a little 450! The Rave 3D has a website at http://www.rave-3d.com/, definately check it out. You have to think there's bigger things to come from this. ... MA Stratus 90 Build (and crash!) Review; The MA Stratus has ... JR 770T Review;
|
www.littlerotors.com/
www.littlerotors.com/
|
|
The two rotor stages are geared for counter-rotation and at least one of the rotors is perforated proximate its center to allow air to be drawn between the opposed surfaces thereof, where its passage over the impeller blades develops ... Thus as rotor 50 is turned a concurrent opposite rotation occurs in rotor120.
|
www.patentgenius.com/patent/6032458.html
|
|
We were planning on having the rotors turned, since they do not look that bad at all. Is there any reason we should not get the rotors turned and just buy new ones? We have been looking at Mintex, Raybestos, and Genuine Land Rover brake pads and rotors.
|
en.allexperts.com/q/Land-Rover-Repair-1470/Freelander-B...
en.allexperts.com/q/Land-Rover-Repair-1470/Freelander-Brakes-3.htm
|
|
That is a reason turned rotors warp more easily than the uncut ones. If you have a "warped" rotor, I recommend just buy a new rotor, probably save your more $ in the long run and give you better braking performance. ... I would NEVER, have never, hesitated having my rotors turned, "cut" if needed and within tolerance.
|
us.lexusownersclub.com/forums/lofiversion/index.php/t23...
us.lexusownersclub.com/forums/lofiversion/index.php/t23936.html
|
|
This has happened to me twice now. After having the rotors turned twice, I get to buy a new set of rotors next time. I'm thinking about going back to the stock pads. Any suggestions? ... Turned the rotors, the right front was the real problem, the inside was warped more than the outside; the outside only had .005" of...
|
www.i-club.com/forums/archive/index.php/t-87836.html
|
|
