Use a primer-sealer. If it's put over bare metal correctly, it will keep down rust for awhile. (I've never used a black primer); It's best to paint with color immediatly after the primer so you don't have to go through the clean-up again. ... worked at a car detailing shop for a year...
|
answers.yahoo.com/question/index?qid=20081226230457AADs...
answers.yahoo.com/question/index?qid=20081226230457AADsJFx
|
|
|
eHow Article: How to Apply Primer in Car Restoration ... How to Apply Primer when Painting a Car...
|
www.ehow.com/video_2200657_apply-primer-car-restoration...
www.ehow.com/video_2200657_apply-primer-car-restoration.html
|
|
|
|
This isn't to be taken lightly: depending on how much topcoat is on the car to begin with, it is VERY, VERY easy (even for an experienced painter) to sand too far and go through into the primer or even to bare metal, particularly on edges and bends and all the contours of a VW bus.
|
www.type2.com/library/body/saprep.htm
|
|
|
“ |
wet sand with 150 grit to get to old paint. then use 400 grit to retouch surface b4 painting. most primers will stick to old paint if it was preped right. just scuff and paint.
http://answers.yahoo.com/question/index?qid=20090704182...
|
|
This must be done according to the specs of the next product to be applied. A product like primer may have particles in it that are 3 Mils. ... When you go into a booth to spray a car most of the work has already been done so there should be no surprises of any type if all equipment is maintained according to it's specifications...
|
www.merkurencyclopedia.com/Exterior/how_to_paint.html
|
|
Summary: Learn tips on how to apply primer with a wet-on-wet approach before you paint a car in this free auto-maintenance video on paint restoration. ... eHow Article: How to Apply Primer when Painting a Car...
|
www.ehow.com/video_2327573_apply-primer-painting-car.ht...
www.ehow.com/video_2327573_apply-primer-painting-car.html
|
|
Just enough to remove any scratch marks and give the primer something to key into. Make sure you file the mold lines off whilst having a picture of the car near by! You don't want to remove what ends up being a panel line! ... And this is how I do my black lining! First clean out the door gaps with the back of a...
|
www.automotiveforums.com/t14192.html
|
|
How to Prime a Car Before Painting. Part of the series: How to Custom Paint a Car. Prime a car with etch primer before you give it a custom paint job, so as to prevent future rust; learn how from our expert custom-car mechanic in this free auto-restoration video. ... How to Mix Primer to Paint a Car ... How to Prep a Car for Primer...
|
www.ehow.com/video_4431707_prime-car-before-painting.ht...
www.ehow.com/video_4431707_prime-car-before-painting.html
|
|
Once all the large flaws are filled, the surface is thoroughly scuffed with 220-grit paper prior to the first primer coat (finer paper will not allow the primer to adhere, coarser will show marks in the primer). Starbucks does not recommend using a DA or power sander on any part of a fiberglass car.
|
www.hotrod.com/projectbuild/113_0404_auto_paint_jobs/pa...
www.hotrod.com/projectbuild/113_0404_auto_paint_jobs/paint_primer.html
|
|
