|
- Use codes available from the Web for other remotes (such as the Philips Pronto) to control all of your equipment with Remote (IR) receivers (including special 'discrete' remote codes your brand-name remote doesn't include!). For example, the USB-UIRT could transmit the discrete 'Input 3' code to your TV to...
|
|
|
IR systems are a 'set and forget' project. Once they work, they rarely ever need to be bothered with again. If additional components are added to the system, connecting an additional IR emitter from the terminator to the new device takes about 45 seconds (just keep the terminator in an easy to reach location).
|
www.techlore.com/article/10264/Hide-Your-A-V-Components...
www.techlore.com/article/10264/Hide-Your-A-V-Components-By-Using-an-IR-Repeater-System/
|
|
|
You have to load lirc_serial at boot. There are instructions in the HOWto links. The way I do it on Fedora is to edit modprobe.conf. Since you likely also have an IR receiver, such as on the hauppage cards, you need two lirc modules loaded, the lirc_i2c module for the IR receiver, and lirc_serial for the IR emitter.
|
www.mythtv.org/wiki/Using_an_IR_Blaster_with_MythTV
www.mythtv.org/wiki/Using_an_IR_Blaster_with_MythTV
|
|
The IR Repeater kit is Easy to Install -; 1. Place the Receiver in your desired location. You can attach it to the location with the included double sided tape if you wish. 2. Place the IR emitters on devices that you want to control. ... You may stick the emitter over the IR emitter on each component, or place on the shelf...
|
www.hdtvhookup.com/irresyhiirco.html
www.hdtvhookup.com/irresyhiirco.html
|
|
The Dual IR Emitter Connects to a mini-jack on selected Gefen devices, extending IR signals outside of the Gefen box to external devices such as a DVD-Player or cable box. Now you can use your Gefen device as a single point of IR control for multiple devices in your AV system.
|
www.gefen.com/kvm/dproduct.jsp?prod_id=5124
|
|
Stick-On IR Emitter 50-Pack (Smarthome Brand) ... This tiny IR emitter let you "hardwire" IR control to your A/V gear. It connects directly to the AV devices you need controlled. More info...;
|
www.smarthome.com/irsignals.html
www.smarthome.com/irsignals.html
|
|
Mini Stick-On Infrared / IR Emitters, Bugs & Blasters - This tiny IR emitter let you "hardwire" IR control to your A/V gear. It connect directly to the AV devices you need controlled. ... Manufacturer Product No.: IR-E1 ... "Once I have gotten these flashers lined up with the receivers on my devices they have worked great.
|
www.smarthome.com/8170/Mini-Stick-On-Infrared-IR-Emitte...
www.smarthome.com/8170/Mini-Stick-On-Infrared-IR-Emitter-Bugs-Blasters/p.aspx
|
|
I have a 4 emitter connecting block, but no emitters yet. Instead of purchasing emitters to connect to each device, I would like to purchase one emitter that will communicate to all devices as they are all in the same location. ... Audioplex makes little stick on devices called IR Prisms that could help.
|
www.remotecentral.com/cgi-bin/mboard/rc-custom/thread.c...
www.remotecentral.com/cgi-bin/mboard/rc-custom/thread.cgi?10558
|
|
Can't get the IR to devices (Read 51 times) ... To test, strip everything down to one j-box sensor w. the two feet of CAT5, one connecting block, and one IR emitter. good luck.
|
forum.xantech.com/cgi-bin/yabb2/YaBB.pl?num=1258657559/...
forum.xantech.com/cgi-bin/yabb2/YaBB.pl?num=1258657559/1
|
|
