|
; This tiny IR emitter let you "hardwire" IR control to your A/V gear. It connect directly to the AV devices you need controlled. ... A high power IR emitter that can be used to blast IR signals up to about 35 feet. Use multiple emitters together to increase range. Simply drill a small hole and push fit to install or use a...
|
www.smarthome.com/SHDIREMITTERS.HTML
www.smarthome.com/SHDIREMITTERS.HTML
|
|
|
|
Flooding IR Emitter simplifies systems where two or three components are placedin one shelf and can be flashed with the ultra-powerful IRFloods. Mount in front, above, below or on the side of the components, the IRFlood saturates each component in the shelf space.
|
www.hometech.com/infrared/emitters.html
www.hometech.com/infrared/emitters.html
|
|
|
STICK-ON IR EMITTER BY SMARTHOME Sticks directly onto the AV equipment IR transparent, works with existing remote controls Pre-programmed and learning operation for easy, flexible set-up...
|
www.amazon.com/Stick-IR-Infrared-Emitter-Smarthome/dp/B...
www.amazon.com/Stick-IR-Infrared-Emitter-Smarthome/dp/B0007N72WY
|
|
What our customers say ... Delivery and Install ... Flame Effect Fire Options...
|
new.picturehousecabinets.com/Home/IREmitterKit/tabid/36...
new.picturehousecabinets.com/Home/IREmitterKit/tabid/366/language/en-US/Default.aspx
|
|
A Basic IR Dectector/Emitter Circuit ... ; This is a very basic infrared detector/emitter circuit. One major downside of this circuit, is that ambient infrared light will interfere with its detecting obstacles. Return to: Schematics Depot, or IR/Ultrasonic Circuits;
|
www.reconnsworld.com/ir_ultrasonic_basicirdetectemit.ht...
www.reconnsworld.com/ir_ultrasonic_basicirdetectemit.html
|
|
Tutorial: How To Make An IR Mini Emitter ... Stanley knife, or very sharp blade Screw cover ... Small drill bit Infra red LED (Maplin code CH10)
|
www.diyha.co.uk/tutorials/ir_emitter.htm
www.diyha.co.uk/tutorials/ir_emitter.htm
|
|
Since 1969 Xantech Corporation has designed, engineered and manufactured a multitude of innovative custom home control devices, from the IR receiver to high definition video distribution.
|
So, I went looking for an alternate IR emitter that I could use to replace the TiVo emitter. Stick-on emitters adhere to the plastic in front of the IR “eye” on most equipment, and are a bit more reliable because they beam the control commands right into the device in question.
|
www.oreillynet.com/etel/blog/2005/09/using_a_xantech_ir...
www.oreillynet.com/etel/blog/2005/09/using_a_xantech_ir_emitter_for.html
|
|
Description: Side-looking Infrared Emitters and IR Detectors. These simple devices operate at 940nm and work well for generic IR systems ... The emitter is driven up to 50mA with a current limiting resistor as with any LED device. The detect is a NPN transistor that is biased by incoming IR light. ... IR Emitter (Clear)
|
www.sparkfun.com/commerce/product_info.php?products_id=...
www.sparkfun.com/commerce/product_info.php?products_id=241
|
|
