|
I'm assuming that you're installing a new CD-ROM drive, but if you need to remove your old ... Some CD-ROM drives have to be screwed into the drive bay, like how you install a floppy drive, while other cases come with brackets (like mine) to attach to the CD-ROM drive so that it slides into the drive bay and locks in place.
|
www.build-your-own-computer-tips.com/install-a-cd-rom-d...
www.build-your-own-computer-tips.com/install-a-cd-rom-drive.html
|
|
|
|
CD drives and burners are identical in form to DVD drives and burners, in fact, you can't ... Now we'll show the CD burner connections one at a time, keeping in mind the are identical to the connections for a CD ROM, DVD ROM or DVD recorder. ... See Installing a Sound Card for attaching the other end.If you skip this step,
|
www.fonerbooks.com/r_cd.htm
www.fonerbooks.com/r_cd.htm
|
|
|
Installing Devices - Optical Drives ; ... Installing A CD/DVD-ROM/WRITER ... The only thing to keep in mind when installing one is whether to make it a slave drive or a master. If you are installing just the DVD-ROM you should slave it off the hard drive. This is done by setting the CD-ROM to the slave setting with a jumper.
|
www.waterwheel.com/Guides/how_to/optical_drives/optical...
www.waterwheel.com/Guides/how_to/optical_drives/optical_drives.htm
|
|
A guide on how to install hard drives, instal cd-rom drives and instal floppy disk drives ... Again make sure that the CD-ROM is nice and flush with front of case for cosmetic reasons. -Installing Optical Drives CD-ROM, CD-RW, DVD-ROM, DVD-RW- ... Home > Build A PC > 4. Installing Hard Drive, Installing CD-ROM and Floppy Disk...
|
www.waterwheel.com/Build_A_PC/build_PC_Step_4.htm
|
|
TS Troubleshooting Installing Multiple Cd Rom Drives(more than one) General Hardware ... TechSpot OpenBoards > Hardware and Tweaking > General Hardware > Installing Multiple Cd Rom Drives(more than one)
|
www.techspot.com/vb/all/windows/t-20870-Installing-Mult...
www.techspot.com/vb/all/windows/t-20870-Installing-Multiple-Cd-Rom-Drivesmore-than-one.html
|
|
now my bios does not recognize neither my dvd-rom nor my cd-rw, so consequently i cannot install windows. i've tried installing the device drivers for both drives in dos 6.22, but since the bios doesn't recognize there is a drive there, the drivers don't work.
|
experts-exchange.com/Web/Q_20432108.html
|
|
As Promised we have created two more free utlities. The first one is our CD Rom disabler. It allows you to enable or disable CD Rom devices on any Windows 2000/XP/2003 machines...
|
www.intelliadmin.com/blog/2006/07/disable-cd-rom-drives...
www.intelliadmin.com/blog/2006/07/disable-cd-rom-drives.html
|
|
This procedure provides instructions for installing the CD-ROM driver for your CD-ROM drive. (Driver, not drive; ... This procedure is designed for new systems that need to get the CD-ROM working in order to allow Windows to be loaded from CD-ROM, but should apply as well to those setting up a CD-ROM drive under DOS...
|
www.pcguide.com/proc/setup/cddriver-c.html
www.pcguide.com/proc/setup/cddriver-c.html
|
|
In fig 1.3 to the right you can see a standard IDE Cable, note there are 3 connections (notice the difference in distance between the connectors), connection A plugs into the motherboard and then the slave and master connections are used for IDE devices such as hard drives, CD-ROM Drives and CD Writers.
|
www.helpwithpcs.com/upgrading/installing_cd_recorder.ht...
www.helpwithpcs.com/upgrading/installing_cd_recorder.htm
|
|
