|
Sanding Out Car Paint Damage ... It is imperative that the sandpaper and surface be kept "wet" at all times while sanding or you will run the risk of putting deep scratches into the paint and also run the chance of rolling up the paint. ... Never use a coarser grit than 1000 to avoid scratching the paint, 1500 to 2000 grit...
|
www.ehow.com/how_2182233_wet-sand-paint-car.html
www.ehow.com/how_2182233_wet-sand-paint-car.html
|
|
|
|
It is said that preparation work for painting is 70 percent sanding. ... that and have primed the car, put on the first coat of paint and use 1000-grit paper with ... Priming and sanding an unpainted part starts with 600-grit sandpaper. ...
|
www.ehow.com/about_5261453_grit-before-final-paint-job....
www.ehow.com/about_5261453_grit-before-final-paint-job.html
|
|
|
Article about buffing car paint to remove scratches. ... Removing scratches from a car's paint job is similar to any polishing procedure: Intentionally scratch the outermost surface using progressively finer abrasives until the marks are impossible to see. ... Car finish after wet sanding with 200 grit sandpaper.
|
www.bodyshopzone.com/archives/finish/scratch/buff_out_0...
www.bodyshopzone.com/archives/finish/scratch/buff_out_01.html
|
|
You should always prime over a 220 grit scratch. It is the perfect size grit. If you are sanding primer so you can apply topcoat, finish with 400grit dry on a machine (DA) or 500 wet sand for a solid color enamel. Basecoat products, particu...
http://wiki.answers.com/Q/What_grit_of_sandpaper_should...
|
|
when sanding it down you should start with a lower number(rougher grit) and move to a higher number like 600-800. the higher number is, the smoother it will become.
http://wiki.answers.com/Q/What_grit_sandpaper_should_yo...
|
|
Unless you never drive your car, small rocks and other ... 1000, 2000 and 3000 grit wet/dry sandpaper. Unigrit Sanding blocks from Mequiars work well. ... You'll then want to sand and polish the paint. Start with the 1000 grit sand paper or the K1000 sanding block (soak them all in water overnight) and sand VERY GENTLY.
|
www.web-cars.com/detail/touchup.php
www.web-cars.com/detail/touchup.php
|
|
This happens when your fingers press through sandpaper and carve grooves in the surface being sanded. The use of a proper sanding block will prevent this from happening. ... The lower part of the car is generally the dirtiest with grit and road grime. By washing the lower sections last, it will help prevent any grit from...
|
www.autovations.com/autobody.htm
|
|
I would recommend spraying an "extra" coat of clear on the car. Do this so if your not happy with the amount of orange peel (this being you first paint job, expect some) you can wetsand the clear with some 1200-1500 grit sandpaper and buff the car back out to a beautiful shine.
|
www.automotiveforums.com/t300813.html
|
|
Dec 6, 2009 ... What is the sequence of paint layers and grit of sanding between coats? ... how to prepare a car for painting how to sand a car before ...
|
answers.yahoo.com/question/index?qid=20091206075701AAtj...
answers.yahoo.com/question/index?qid=20091206075701AAtjFBd
|
|
