"Hard soldering" or "silver soldering" (performed with high-temperature solder containing up to 40% silver) is also...
|
en.wikipedia.org/wiki/Soldering
en.wikipedia.org/wiki/Soldering
|
|
If you have little or no experience of using a soldering iron, then EPE (Everyday Practical Electronics magazine) recommends that you practice your soldering technique on some fresh surplus components and clean stripboard (protoboard), Other solders are available for specialist work, including aluminium and silver-solder.
|
www.epemag.wimborne.co.uk/solderfaq.htm
|
|
Silver soldering or “Hard Soldering” is an art form but it's an art form that anyone can learn with a little practice. With silver soldering, practice...
|
factoidz.com/a-diy-guide-to-silver-soldering-techniques...
factoidz.com/a-diy-guide-to-silver-soldering-techniques/
|
|
Silver soldering techniques lways use non-ferrous metal such as silver, brass or copper. Brass is available in hobby shops in a wide variety of thicknesses...
|
www.admiraltymodels.com/assets/silver-soldering.pdf
www.admiraltymodels.com/assets/silver-soldering.pdf
|
|
If you have little or no experience of using a soldering iron, then we recommend that you practice your soldering technique on some fresh surplus components and clean stripboard (protoboard), The temperature could be boosted for soldering larger joints, for example, or for using higher melting-point solders (e.g. silver solder).
|
www.epemag.com/solderfaq/default.htm
|
|
|
www.fridgedoctor.com/fridge-doctor-book/working-with-co...
www.fridgedoctor.com/fridge-doctor-book/working-with-copper-lines-and-silver-soldering-techniques.html
|
|
Oxy-acetylene or oxy-propane gear is really for the specialist and not really suitable in novice hands for silver soldering, special techniques are needed...
|
www.astronomiainumbria.org/advanced_internet_files/mecc...
www.astronomiainumbria.org/advanced_internet_files/meccanica/easyweb.easynet.co.uk/_chrish/t-solder.htm
|
|
Soldering can be a difficult skill to master, but with the A bad solder joint will look dull, more grey than silver. Or if it has a little curl at the top it needs to be redone. If you need to redo a solder joint, always start from scratch, removing the solder you just put on, and cleaning the surface with alcohol.
|
www.allsands.com/HowTo/howtosolder_cc_gn.htm
|
|
Soft Soldering Recommended Procedure for Soldering Brazing (Silver Soldering)
|
www.azom.com/details.asp?ArticleID=1178
|
|
