|
Tube anchoring methods and devices of the above-mentioned kind are particularly suitable for the expansion-swaging of tube ends into the receiving bores of the tube plates of a heat exchanger, for example.
|
www.freepatentsonline.com/3977068.html
|
|
|
|
Present methods include mechanical swaging and standard electromagnetic swaging. In small tubing applications mechanical swaging methods become very hard to implement. The high forces required to swage tend to cause failure of equipment and tooling.
|
www.freepatentsonline.com/5162769.html
|
|
|
|
Swaging bullets using the cold flow method with manual hand tools, presses and dies is often credited to Ted Smith, author of the 45 page book The Bullet ...
|
en.wikipedia.org/wiki/Swaging
en.wikipedia.org/wiki/Swaging
|
|
|
For example, it is known that present methods of rotary swaging are not suitable for reductions in diameter of greater than about 30% in a single pass in that they give products with structural and cosmetic problems such as a flaking or cracking.
|
www.faqs.org/patents/app/20090014082
|
|
Patent application title: DOWNHOLE SWAGING SYSTEM AND METHOD ... Some such methods will be described with reference to FIGS. 3 and 4 below. [0017]Referring to FIGS. 3 and 4, alternate embodiments of the tubular 14 are disclosed. The tubular 14, of FIG.
|
www.faqs.org/patents/app/20090139732
|
|
The purpose of this investigation is to use a swaging method to produce tungsten cathode activated with nano-ThO2, and investigate the effect of ...
|
linkinghub.elsevier.com/retrieve/pii/S0921509301019694
|
|
Swaging is a forming process in which a metal workpiece is reduced to a desired size or shape by a succession of rapid hammer blows from a rotating or stationary die.
|
class.et.byu.edu/mfg130/processes/descriptions/deformat...
class.et.byu.edu/mfg130/processes/descriptions/deformation/swaging.htm
|
|
The cold swaging of fittings on wire rope is a severe process requiring considerable movement of the steel in the fitting. The steel in the fitting is forced under great pressure to flow into the crevices between the wires and strands of the wire rope and, at the same time, to elongate parallel to the wire rope.
|
www.slingchoker.com/sling2/crosby/ii/ii53.htm
|
|
Step 2 - Insert rope into socket and Swage using procedure outline on Swaging Methods. Do not swage beyond machined area of shank. ... Step 4 - Swage the sleeve following the procedure outlined on Swaging Methods. After swaging, sleeve then can be stamped as outlined on the next page.
|
www.slingchoker.com/sling2/crosby/ii/ii54.htm
|
|
