|
More specifically, the invention includes the acquisition of x-ray attenuation data using a phantom that produces a non-uniform z-axis gradient in the x-ray flux producing an error signature vector that indicates by its values the variations expected in projection profile data when error conditions are present,
|
www.freepatentsonline.com/5301108.html
|
|
|
|
probe x-ray line scanning method to measure the Ag element distribution along the z-axis of the crystal. The result indicates that there is a silver ...
|
www.mrs.org/s_mrs/bin.asp?CID=12333&DID=230013&DOC=FILE...
www.mrs.org/s_mrs/bin.asp?CID=12333&DID=230013&DOC=FILE.PDF
|
|
|
|
In the splot , the zero-point of Z-Axis is placed above the XY plane. To move this origin onto the XY plane, use set ticslevel . When ticslevel=0, the zero of Z-Axis moves to on the XY plane ... The above, levels 10 indicates that ten contour lines are drawn. The next, incremental defines the initial, increment,
|
t16web.lanl.gov/Kawano/gnuplot/plot3d-e.html
|
|
|
Z-Axis Leadscrew; I also found the Z axis mount not to be perfectly parallel with the axis. I put a thin shim under the stepper motor mount (a broken piece of single edge razor blade) and made sure the leadscrew did not move while tightening the bolts.
|
www.cuttingedgecnc.com/machinemods.htm
|
|
Between 2002 and 2004 Z-Axis worked for the attorneys representing Silverstein Properties to help prove that the collapses of the twin towers resulting from the attacks on 9/11 were two occurrences under the terms of the property insurance policy.
|
podcasts.zaxis.com/pac/world-trade-center
podcasts.zaxis.com/pac/world-trade-center
|
|
; A New Ballscrew for the Z-axis; or; How to simulate a cylindrical grinder with a lathe ... It must be indicated to run dead-true relative to the axis of the lathe, so the turned journal will not run eccentric. Excess eccentricity will ruin the job.
|
Sage Z Axis Fly Rod - User Rating: 4 stars. Review Summary: New to the market, so question marks remain. You have to try the rod to appreciate it. While maybe not imbued with magical properties, it might get the mojo working. ... And, with the Z-Axis, he thinks he finally has a rod that will do it. Taking me to the Sage...
|
www.epinions.com/review/Sage_Z_Axis_Fly_Rod/content_278...
www.epinions.com/review/Sage_Z_Axis_Fly_Rod/content_278797520516
|
|
MATERIALS AND METHODS: Two study groups of 26 patients each underwent MDCT of neck using z-axis AEC with 8 noise index (NI), 150–440 mA, and 10 NI, 75–440 mA, respectively. A control group consisting of another 26 patients underwent MDCT of neck with fixed-current technique (300 mA).
|
www.ajnr.org/cgi/content/full/27/10/2221
|
|
CNC Mill Z-axis Backlash Lock, P/N 4017Z ... The purpose of the Z-axis backlash lock ... Installing and using the Z-axis lock on a CNC mill...
|
www.sherline.com/4017Zinst.htm
|
|
