Deformation (mechanics) - Wikipedia, the free encyclopedia
In continuum mechanics, deformation is the change in shape and/or size of a continuum body after it undergoes a displacement between an initial or undeformed configuration \ \kappa_0(\mathcal B)...
en.wikipedia.org/wiki/Deformation_(mechanics)
However, engineering strain is a small strain measure which is invalid once the strain in your model is no longer 'small' (approximately 5%). True strain, which is a nonlinear strain measure that is dependent upon the final length of the model, is used for large strain simulations.
www.drd.com/searchable/techsupport/eng_true_strain.htm www.drd.com/searchable/techsupport/eng_true_strain.htm
where . Called the engineering shear strain, gxy is a total measure of shear strain in the x-y plane. In constrast, the shear strain exy is the average of the shear strain on the x face along the y direction, and on the y face along the x direction.
www.efunda.com/formulae/solid_mechanics/mat_mechanics/s... www.efunda.com/formulae/solid_mechanics/mat_mechanics/strain.cfm
The most universal measuring device for the electrical measurement of mechanical quantities is the strain gage. ... Strain Gage Measurement ... The bonded resistance strain gage is by far the most widely used in experimental stress analysis. These gages consist of a grid of very fine wire or foil bonded to the backing or...
www.omega.com/techref/strain-gage.html www.omega.com/techref/strain-gage.html
Strain engineering - Wikipedia, the free encyclopedia
Strain engineering refers to a general strategy employed in semiconductor manufacturing to enhance device performance. Performance benefits are achieved by modulating strain in the transistor channel...
en.wikipedia.org/wiki/Strain_engineering
One proposed method for reducing strain and defect density in mismatched heteroepitaxial systems is growth upon patterned substrates. The goal of this work is to achieve strain relaxation and decreased defect densities in ... MSE / Research / Projects / Engineering of Strain Relaxation Using Focused Ion Beam...
www.mse.engin.umich.edu/research/projects/245
The explosive growth in the microelectronics industry has resulted in ever smaller silicon chips, which are packaged, or enclosed, in a plastic environment. During operation of the microelectronic device, ... Over a long period of operation, ... The accomplishments of my research group have been recognized in a number of ways.
www3.lehigh.edu/engineering/meche/academics/strain.asp www3.lehigh.edu/engineering/meche/academics/strain.asp
Cast steel: Engineering Stress-strain Curve ... Since both the stress and the strain are obtained by dividing the load and elongation by constant factors, the load-elongation curve will have the same shape as the engineering stress-strain curve. The two curves are frequently used interchangeably.
steel.keytometals.com/Articles/Art43.htm
Wei Sheng Wu Xue Bao. 1997; 37(6):473-6 (ISSN: 0001-6209) ... Feng Y; Yang W; He Z; Chemical Engineering Research Center, Tianjin University, Tianjin 300072. ... The enzyme activity was raised under the conditions of initial pH 7.0, MgCl2 instead of MgSO4, and glucose (0.1%) in the substrate. The fermentation of c172(pBx...
www.medscape.com/medline/abstract/11189381
Definitions