|
Eave: a roof edge that extends out past the exterior wall line. ... Rake: the sloped perimeter edge of a roof that runs from the eaves to the ridge. The rake is usually perpendicular to the eaves and ridge.
|
www.roofhelp.com/anatomy.htm
www.roofhelp.com/anatomy.htm
|
|
|
|
A roof is made up of many details that come together to define a home and its style. ... Gabled refers to the family of houses classified by the straight slope falling from ridge to eave, creating a peak or triangle on the side or front facade. Gabled houses have rakes on the gable facades and eaves on the non-gabled facades.
|
www.bobvila.com/HowTo_Library/Roof_Terms_and_Terminolog...
www.bobvila.com/HowTo_Library/Roof_Terms_and_Terminology-Miscellaneous-A1936.html
|
|
|
This overhanging eave is sometimes called an "extended roof rake." The top chord of the end truss is constructed so that it matches the bottom edge of the top chord of the other roof trusses. It is made with no rafter tails (the part that overhangs on the ... Ladder type "extended roof rake" overhanging eave roof framing...
|
www.designcommunity.com/home_design/225.html
|
|
• Be easy to use and install, with no cutting on the roof; ProStart™ Eave/Rake starter strip is a key part of the GAF-Elk Smart Choice® Roof System; Solution (see reverse). Eave/Rake Starter Strip; Eave/RakeStarter;
|
www.gaf.com/Content/Documents/20215.pdf
|
|
Nucor eave or rake extension of the roof purlin system of a steel or metal building. ... The standard Nucor eave or rake extension is an extension of the roof purlin system, and therefore follows the profile of the main building roof line. Unlike the canopy beam, the structural components (beams and/or purlins) are...
|
www.nucorbuildingsystems.com/Products/architecturalprod...
www.nucorbuildingsystems.com/Products/architecturalproducts/rakeextensions/rakeextensions.html
|
|
A good, sturdy ladder, long enough to safely reach the roof; a rope to secure the ladder to the roof and to serve as a safety line you keep you from falling during your roofing project. ... Metal drip edge for roof rake and eave of roof.
|
www.startremodeling.com/roofing_installation_guidelines...
www.startremodeling.com/roofing_installation_guidelines.htm
|
|
rake fascia. The vertical face of the sloping end of a roof eave; rake siding. The practice of installing lap siding diagonally ranch. A single story, one level home ... ... The vertical face of the sloping end of a roof eave. Rake siding; The practice of installing lap siding diagonally ...
|
en.mimi.hu/home/eave.html
en.mimi.hu/home/eave.html
|
|
Metal-Era's Hi-Perf Systems are the perfect solution for intake venting at the eave and exhasut venting at the ridge. They eliminate the need for all wood blocking, vented soffits and heavy ... The leader in commercial roof edge and roof ventilation solutions. ... Home » Products » Airflow Eave, Rake and Ridge Systems...
|
www.metalera.com/ProductListing.aspx?id=408
|
|
roof rakes, turbine vents, roof rake: It depends. First of all, we have to assume that you have the proper inlet venting at the eaves. If your roof rake is steep enough to produce a good draft, ridge venting is usually good enough. ... If your roof naturally drafts well, you will not get additional benefit by...
|
en.allexperts.com/q/Roofing-1598/ridge-vent-vs-turbine....
en.allexperts.com/q/Roofing-1598/ridge-vent-vs-turbine.htm
|
|
