|
Takeaway: So there you are, with a dangling ribbon cable and a question. Where's Pin 1? In this Daily Feature, Ken Dwight gives you five methods for finding a pin in a haystack. ... These IDE and floppy disk controller connectors have a distinctive white marking under Pin 1.
|
articles.techrepublic.com.com/5100-10878_11-1047604.htm...
articles.techrepublic.com.com/5100-10878_11-1047604.html
|
|
|
|
cables? Answer: Take notes, make a sketch, attach labels, and so forth. 4. What marking on a ribbon cable identifies pin 1? Answer: A colored stripe on one ...
|
www.jeffdavis.cc.al.us/index.php?action=2895
|
|
|
These PC cables have a notch or key on one side of plug and can only be inserted in one orientation in connector socket. If the notch is missing, you may also look for a small arrow mark on pin 1 of the cable plug. Other marking is that the...
http://www.webanswers.com/technology-computers/computer...
|
|
|
1. How do you display individual devices under the group headings? ... 2. What are two ways to access a device Properties box in Device Manager? ... 3. What types of additional devices appeared when you chose to display hidden devices?
|
faculty.nwacc.edu/mmorris/mhs/20041206_lab.html
|
|
|
Solution 3-1 ... 4. What marking on a ribbon cable identifies pin 1? ... Answer: A colored stripe on one side of the cable identifies pin 1.
|
www.jdcc.edu/index.php?action=2895
|
|
To ensure the ribbon cable is plugged in correctly, one side of the cable has a red stripe. This red stripe identifies pin 1 on the ribbon cable. It is easy to see in this picture running along ... There should be some marking on the back of the floppy drive where the ribbon cable connects to indicate the location of pin 1.
|
www.mysuperpc.com/build/pc_install_hard_floppy_drives.s...
www.mysuperpc.com/build/pc_install_hard_floppy_drives.shtml
|
|
with a ribbon cable ... Pin 1 is often marked on the board/header in some way. ... The red striped wire on a grey ribbon cable identifies wire 1.
|
www.batsocks.co.uk/readme/isp_headers.htm
|
|
1. Getting Started: ... 40 Pin Interboard Connector (Dead Game or Random Lockups & Resets) ... Pinball Liz Tech Reprints #1 to #6, August 1995 to August 1996, for their tips and tricks.
|
www.pinrepair.com/sys37/index1.htm
www.pinrepair.com/sys37/index1.htm
|
|
* Pin assignment of internal connector may be different for different motherboard models. Pin 10 removed in connector. Internal IDC connnector wired to external port with a simple flat ribbon cable. ... The byte marked with 1. is send first, then the others. The bit D6 in the first byte is used for syncronizing the software...
|
pinouts.ru/SerialPorts/Serial9_pinout.shtml
pinouts.ru/SerialPorts/Serial9_pinout.shtml
|
|
