Zip Drive ABCs; Internal Zip installation; Troubleshooting After installing the Zip drive, your CD-ROM will be mapped as the last drive letter. For example, if your CD-ROM drive letter was D: after the installation, your CD-ROM drive letter would become E:, this is a natural occurrence, your CD-ROM will always be the...
www.computerhope.com/help/zipdrive.htm www.computerhope.com/help/zipdrive.htm
If additional issues are encountered during or after the installation of the IDE Zip drive, please refer to our main Zip drive page for additional help and...
www.computerhope.com/issues/ch000416.htm
If the Zip drive is the only drive on the secondary IDE/ATAPI channel (no CD-ROM drive), you will need to change the jumper setting on The Zip ATAPI drive is ready to install in a 5 1/4 inch drive bay. The mounting bracket must be removed for installation in a 3 1/2 inch drive bay. Zip ATAPI drive bay installation...
www.iomega.com/support/documents/10014.html
If you encounter a problem while installing or using your Zip® ATAPI drive, check this section for possible solutions. The green activity light on the Zip drive does not turn on The Zip drive is not assigned a drive letter, or the IomegaWare software cannot find the Zip drive...
www.iomega.com/support/manuals/zip2a/trblshoot.html www.iomega.com/support/manuals/zip2a/trblshoot.html
iomega-na-en.custhelp.com/
I STRONGLY recommend your following those instructions during Zip drive installation activities. Simply rebooting the computer may give erroneous results...
www.troubleshooters.com/tfresh95/zipdrive.htm www.troubleshooters.com/tfresh95/zipdrive.htm
Use the following procedures to install a Zip™ drive in your PowerMate Before you install the Zip drive in your system, prepare the drive for your...
support.necam.com/download/455-00325-000low.pdf
These instructions apply to connecting external parallel port Zip drives to PCs. Install the Zip drive's drivers and other software according to the...
www.ehow.com/how_3676_connect-zip-drive.html www.ehow.com/how_3676_connect-zip-drive.html
When the system reboots you will have a slow but completely workable Debian base installation running off of your ppa ZIP drive. Proceed normally with the installation at this point.
www.redhat.com/mirrors/LDP/HOWTO/ZIP-Install-7.html www.redhat.com/mirrors/LDP/HOWTO/ZIP-Install-7.html
For my installation, I have and used: I decided against installing any development packages as the ZIP drive, at least an unpatched kernel version, is rather slow to get anything to compile. I also choose not to install X mainly for disk space issues.
www.redhat.com/mirrors/LDP/HOWTO/ZIP-Install-4.html www.redhat.com/mirrors/LDP/HOWTO/ZIP-Install-4.html
Related Topics
Related Topics
Definitions