You are seeing reference results for stabilizing anneal because there's not a match on Dictionary.com.
|
www.industrialheating.com/Articles/Column/62087467d24db...
www.industrialheating.com/Articles/Column/62087467d24db010VgnVCM100000f932a8c0____
|
Jun 14, 2006 ... Repeated Process (Stabilize) Annealing A stabilize anneal is sometimes performed after conventional annealing for grades containing titanium ...
|
|
www.sandmeyersteel.com/347-347H.html
|
Stress levels may be reduced by annealing or stress-relieving heat treatments following cold deformation. The stabilized Alloys 321 and 347 are good choices ...
|
|
www.onepetro.org/mslib/servlet/onepetropreview?id=NACE-...
www.onepetro.org/mslib/servlet/onepetropreview?id=NACE-98580
|
The heater was designed for tube metal temperatures of 565°C ( 1050°F), and the tubes were specified to be stabilized annealed in order to resist polythionic ...
|
|
www.onepetro.org/google/Papers/NACE/Meetings/2011/CORR1...
www.onepetro.org/google/Papers/NACE/Meetings/2011/CORR11/11361/11361.pdf?id=NACE-11361
|
temperature commonly referred to as a stabilization anneal. This is the standard condition .... And, the stabilizing anneal heat treatment used for alloy 825 results ...
|
|
link.aip.org/link/?JAPIAU/53/4480/1
|
stabilizing anneal for 30 min at 325-350·C is adequate to assure 99% stability for 20 years at. 125 .c. The required anneal is consistent with current design and ...
|
|
www.smcwv.com/documents/Nickel%20Alloys%20and%20Welding...
www.smcwv.com/documents/Nickel%20Alloys%20and%20Welding%20Products%20For%20PTA%20and%20Chloride%20Containing%20Refinery%20Environments.pdf
|
for good resistance to PTA SCC when given the proper final anneal. AISI Type 304 SS and nickel alloy UNS N08800 are not stabilized materials and are ...
|
|
|
... SPRING STEEL STRIP; SPRING TEMPER; STABILIZING ANNEAL; STABILIZING TREATMENT; STAINLESS STEEL; STAMPING; STEAM BLUED; STEEL ...
|
|
ieeexplore.ieee.org/iel5/20/22909/01066830.pdf?arnumber...
ieeexplore.ieee.org/iel5/20/22909/01066830.pdf?arnumber=1066830
|
It has been clear that stabilizing anneal after the plat'ing ext'ends the lifetime of the wire mark- edly and is positively necessary in the wire fabrication process.
|
|
www.suppliersonline.com/propertypages/348.asp
|
Material must be water quenched or fully annealed after working to reattain ... For maximum corrosion resistance, see the note on stabilizing anneal under ...
|
|
linkinghub.elsevier.com/retrieve/pii/002236979390012G
|
The value of T, depends on the final temperature of the previous stabilizing anneal (Ta) with To growing noticeably at T,i^720K. After annealing at higher ...
|
